Heel shrouds type Cat
- Heel shrouds type Cat for digging buckets in hardened wear steel.
- Back model - Rounded and cut-in for the back.
- Front model - Flat and straight for placement far forward in the bucket.
138-6529 T25mm straight
Front / For flat part. Cat 336-352.
138-6551 T25mm Cupy against the sweep, Conical against the gable
Rear / For the sweep. Cat 336-352.
157-1019 T30mm straight
Front / For flat part. Cat 385/390.
157-1027 T30mm Cupy against the sweep, Conical against the gable
Rear / For the sweep. Cat 385/390.
Heel shrouds, are easy to use. Used mainly on excavators. Reduces wear on the wear plate and the sides.
Heel shrouds type Cat is a two-part system in hardened wear steel.
The rear model has a cupped bottom plate to sit tight against the wear plate and clipped to be able to be placed close together around the edge
The front model is straight and flat to sit in the flat front part of the bucket and provides minimal space between the protections.