Heel shrouds type Cat

Description

Heel shrouds, are easy to use. Used mainly on excavators. Reduces wear on the wear plate and the sides.

Heel shrouds type Cat is a two-part system in hardened wear steel.

The rear model has a cupped bottom plate to sit tight against the wear plate and clipped to be able to be placed close together around the edge

The front model is straight and flat to sit in the flat front part of the bucket and provides minimal space between the protections.

Product Details

Reference 14010636

Heel shrouds type Cat for digging buckets in hardened wear steel.
Back model - Rounded and cut-in for the back.
Front model - Flat and straight for placement far forward in the bucket.

Size

Article

Not

Size	Article	Not	Weight	Reference
Type Cat	138-6529 T25mm straight	Front / For flat part. Cat 336-352.	13.20 kg	14010636
Type Cat	138-6551 T25mm Cupy against the sweep, Conical against the gable	Rear / For the sweep. Cat 336-352.	12.90 kg	14011633
Type Cat	157-1019 T30mm straight	Front / For flat part. Cat 385/390.	29.80 kg	14010990
Type Cat	157-1027 T30mm Cupy against the sweep, Conical against the gable	Rear / For the sweep. Cat 385/390.	29.20 kg	14011609

Heel shrouds type HS

Heel shrouds

TOR

Available

Heel shrouds for excavators. Covers protruding sheet metal. Conically cut-in on both sides - can be placed close together. Cupped to sit tight against the wear plate. Good for new constructions.

View

Heel shrouds type ES

Heel shrouds

TOR

Available

Universal heel shrouds for excavators in hardened wear steel. Good for repairing. Cupped base plate, short and flat side plate.