Tooth system type Cat J
Bucket tooth system Cat J with size designations in inches and side locking pin is the dominant tooth system in Sweden. Partrex has one of the Nordic region's largest stocks of bucket teeth, such as digging teeth, rock teeth, rake teeth and loader teeth. We also have a very wide range of tooth adapters such as digging tooth adapters, loader tooth adapters and flat adapters. Most new buckets in Sweden today are delivered with the Cat J. tooth system.
Toothsystem Cat J consists of:
- Tandspets (med hål för hållarens nos)
- Tandhållare (svetsad i skopskäret)
- Låspinne (rund, slås in från sidan)
- Låsring (sätts i hållarens nos innan tanden)
We have type Cat J teeth and brackets for all needs and in all sizes for both excavators and loader buckets.
Size guide with measurement tooth system Cat J
Tooth size |
J-measure |
Locking pin
Length
|
Locking pin
Diameter Ø
|
Locking ring
Diameter
|
2 tum / J200 |
51 mm |
61 mm |
11 mm |
22 mm |
2,2 tum / J220 |
56 mm |
67 mm |
14 mm |
30 mm |
2,5 tum / J250 |
64 mm |
78 mm |
14 mm |
30 mm |
3 tum / J300 |
76 mm |
92 mm |
14 mm |
30 mm |
3,5 tum / J350 |
89 mm |
108 mm |
19 mm |
40 mm |
4 tum / J400 |
102 mm |
119 mm |
22 mm |
42 mm |
"4,5" tum / J450 (actually J460) |
117 mm |
141 mm |
24 mm |
44 mm |
5,5 tum / J550 |
140 mm |
162 mm |
25 mm |
53 mm |
6 tum / J600 |
152 mm |
195 mm |
30 mm |
59 mm |
7 tum / J700 |
178 mm |
200 mm |
32 mm |
70 mm |
8 tum / J800 |
203 mm |
240 mm |
35 mm |
70 mm |
Showing 1-13 of 13 item(s)
Available
Bucket tooth for all digging.
Self-sharpening. Stays sharp throughout its lifetime.
Very high steel quality - both high hardness & high toughness.
Our bestseller tooth.
Available
Bucket tooth for all digging.
Self-sharpening. Stays sharp throughout its lifetime.
High steel quality.
Very affordable.
Available
Available
Forged excavator teeth. Stays sharp. Long-lasting.
Available
Excavator tooth adapters in all sizes from J200 to J800. High steel quality, optimal balance between high hardness, high toughness and good weldability. Good fit and consistent quality
Available
Forged excavator teeth adapters. Maximum toughness and hardness. Solid forks. Made in Italy.
Available
Is on top. Wide range of stock from 2 to 5.5 inches. Very high steel quality. Optimal balance between durability, toughness and weldability.
Available
Fork adapters for loader buckets. Wide stock range from 3.5 to 6 inches. Very high steel quality. Optimal balance between durability, toughness and weldability.
Available
Heavy loader tooth with wide wear plate. High steel quality - both high hardness and high toughness. Mainly used with half arrow middle segments.
Available
Locking pins for type Cat J bucket teeth. In all sizes - from J200 to J800.
Available
Locking rings for type Cat J bucket teeth. In all sizes - from J200 to J800.
Available
Extremely sharp rip tooth. Self-sharpening - no thick cross sections. Very effective at ground frost demolition.
Available
Self-sharpening universal tooth. Straight front edge and flat profile.
Bucket tooth system Cat J with size designations in inches and side locking pin is the dominant tooth system in Sweden.